Category: Technologic Section

SCAME GOING GREEN

Posted on | by webadmin

The environmental impact of using industrial furnaces in controlled atmosphere has always been significant and it is a considerable impact issue caused by:

– CO and CO2 emissions
– high electrical consumption
– end of the life cycle of used materials.

The GREEN LINE furnaces manufactured by SCAME aim at the following improvements by means of innovative technologies:

– zero CO and CO2 emissions
– electrical consumptionon reduced by 20%
– use of materials, 90% of which consists of renewable resources.

Click for more information

Adjustment prescriptions of SCAME furnaces to norms AMS 2750 E / CQI9

Posted on | by gestore

For the heat treatment of high quality materials used in the aerospace and automotive industries, the adjustment of the heat treatment equipment to the following norms describing the fundamental thermic requisites is needed:

  • AMS 2750 E ( Aerospace Material Specifications)

  • CQI-9 applied to the manufacturing of the automotive components

These norms describe in details the controls and requisites needed by the thermic process and what parameters should be constantly kept under control.

To know in detail the necessary controls, the instrumentation and tests required by norms AMS 2750 E / CQI9, please check the following link:

Ams Norms – EN

 

Report on the fundamental principles of stainless steel parts brazing.

Posted on | by gestore

The use of controlled atmosphere continuous furnaces for brazing and annealing of stainless steel parts is increasing with the increase in the use of stainless steel parts by manufacturers of several industries such as aerospace, hydraulic and automotive, both for current and for future projects.

Although we know a lot about metallurgy and thermodynamics of iron, chromium, nickel and their components, a review of the application of the basics of the usual techniques and technological devices can help improve the product quality, expand their application and optimize costs for competiveness improvement.

Find out in detail about the fundamental principles of stainless steel parts brazing in nitrogen and hydrogen controlled atmosphere in continuous furnaces at the following link or visit us at Inox Line.

Inox Report-EN